VOLFA Position Sensor
Ultra precision conductive plastic displacement sensor
LTD micro displacement sensor (elastic automatic reset electronic ruler) measurement of the length of 0-10... 10mm, using conductive plastic rail and rare earth metal to contact, to provide a stable signal, low noise and high operation life. The best repeatability is + 0.01mm, and the linear accuracy is up to 0.3%
DownloadLTD micro displacement sensor (elastic automatic reset electronic ruler), inside the durable conductive plastic resistance rail, suitable for position measurement and automatic control applications. LTD micro displacement sensor (elastic automatic reset electronic ruler) measurement of the length of 0-10... 10mm, using conductive plastic rail and rare earth metal to contact, to provide a stable signal, low noise and high operation life. Good repeatability is + 0.01mm, and the linear accuracy up to + 0.3%, no fault resolution, the fixed support can be anywhere in the aluminum slot for quick and firm installation. LTD micro displacement sensor (elastic automatic reset electronic ruler) using stainless steel bearing solid, provide the life of > operation and high close sliding along the length of the > 100x106, 25x106; M.
|
LTD size chart
|
|
|
|
|
|
LTD technical characteristics
|
| LTD-K series |
10
|
25
|
50
|
75
|
100
|
|
|
LTD-S series
|
|
|
25
|
50
|
75
|
100
|
| Electric total stroke (T.E) | mm |
12
|
27
|
52
|
77
|
102
|
| Available electric stroke (A.E) | mm |
10
|
25
|
50
|
75
|
100
|
| Resistance value + 20% | kΩ |
1
|
1
|
5
|
5
|
5
|
| Independent linear rate | % |
0.3
|
0.3
|
0.3
|
0.3
|
0.3
|
| Mechanical stroke (M.T) | mm |
15
|
30
|
55
|
80
|
105
|
| Resolution |
Infinite no break
|
|||||
| Recommended current | mA |
<1
|
||||
| Recommended operating temperature range | °C |
-30 to +100
|
||||
| Protection level |
IP40
|
|||||
| Operating force |
Not more than 5N (stroke < 75mm), less than 10N ((> 75mm)
|
|||||
| power |
1W - 3W
|
|||||
| Maximum operating voltage |
30V DC
|
|||||
| shock |
IEC 68-2-6：1982 10G
|
|||||
| To attack |
IEC 68-2-29：1968 40G
|
|||||
| Shell size A | mm |
48
|
63
|
94.4
|
134.4
|
166
|
| Shell size B | mm |
15
|
30
|
55
|
80
|
105
|
| Shell size C | mm |
7
|
12
|
12
|
12
|
12
|
| Shell size D | mm |
6
|
32
|
32
|
32
|
32
|