VOLFA Position Sensor
Magnetostrictive linear position sensor
Economical type Independent linearity: ± 0.05% Measuring length: 75mm ... 4500mm Output signal: Analog 0-10V, 4-20mA
Download
TCP Series Magnetostrictive Position Sensor
Non-contact magnetostrictive measurement technology. This technology provides high accuracy, direct and absolute displacement output. Non-contact design is not only easy to install, but also to eliminate all the work wear caused by the error.
Blowing machine
Die Casting Machine
Rubber molding machine
Presses
Logo making machine
Paint sprayers
Metal and woodworking machinery
Automotive & Traveling Machinery
Technical Parameters:
Working power +24Vdc (20.4 - 28.8Vdc)
Input protection Polarity protection to -30Vdc, over-voltage protection to 36Vdc
energy used 50-140mA (according to the range may decide)
Dielectric strength 500Vdc (DC ground to the machine ground)
Output 0-10Vdc, 10-0Vdc dual output, the minimum load resistance of 5kΩ
Resolution Infinite (depending on controller A / D and supply ripple)
Repeatability Full scale < ±0.005%
Linearity Full scale < ± 0.05% (minimum ± 90μm)
Operating temperature -40 to 85 ° C
Protection level IP65 (when properly connected to the plug)
Oscillation index 10-2000 Hz / IEC standard 68-2-6
Impact index 100g (single shock) / IEC standard 68-2-27 (durability)
Update time 0.5ms less than 1200mm / 1.0ms less than 2400mm / 2.0ms 4500mm or less
Voltage output:
Non-contact magnetostrictive measurement technology. This technology provides high accuracy, direct and absolute displacement output. Non-contact design is not only easy to install, but also to eliminate all the work wear caused by the error.
The aluminum molded case accords with IP65 standard, can guarantee to work in harsh and high dust pollution environment. The fixed clamps provide a flexible and simple mounting method, suitable for general mechanical use.
Application Industry:
Blowing machine
Die Casting Machine
Rubber molding machine
Presses
Logo making machine
Paint sprayers
Metal and woodworking machinery
Automotive & Traveling Machinery
Technical Parameters:
Working power +24Vdc (20.4 - 28.8Vdc)
Input protection Polarity protection to -30Vdc, over-voltage protection to 36Vdc
energy used 50-140mA (according to the range may decide)
Dielectric strength 500Vdc (DC ground to the machine ground)
Output 0-10Vdc, 10-0Vdc dual output, the minimum load resistance of 5kΩ
Resolution Infinite (depending on controller A / D and supply ripple)
Repeatability Full scale < ±0.005%
Linearity Full scale < ± 0.05% (minimum ± 90μm)
Operating temperature -40 to 85 ° C
Protection level IP65 (when properly connected to the plug)
Oscillation index 10-2000 Hz / IEC standard 68-2-6
Impact index 100g (single shock) / IEC standard 68-2-27 (durability)
Update time 0.5ms less than 1200mm / 1.0ms less than 2400mm / 2.0ms 4500mm or less
Voltage output:
Selection table:
